Steve Silverstein – Steveco Worldwide

1. Favourite knob or fader or switch on a piece of gear and why?

I like the stepped input gain on the dbx 786.  It’s easy to see and feels solid when I adjust it.

dbx 786
DBX 786

2. Do you have an ‘almost’ perfect bit of kit? What would you change?

The Studio Technologies AN-2 Stereo Simulator does a useful trick, but has a terrible interface.  A couple of knobs both affect the level, and I rarely want to adjust stereo width (which I do on my console) or add the modulation, so it’s confusing what to adjust if the level is wrong.

Studio Technologies AN-2 Stereo Simulator

3. What setup do you bring on holiday or tour or commute etc.?

So much of the work that I do involves analog gear, I don’t bring anything with me and do my work at the studio.  The separation is nice… mostly.

SteveCo Studio Desk

4. What software do you wish was hardware and vice versa?

I wish I had a box that did denoising like Izotope RX, that I could add to a single channel after processing and before the console.
I’m happy to do as much as possible without touching a computer!

Izotope RX

5. Is there anything you regret selling… or regret buying?

I feel like my mixes got worse while I was monitoring primarily through the ADAM A7x’s.  I’m not sure if this was related to the speakers, but the direction seemed to reverse when I got midfields at the studio.  I still like the speakers and they sound good, but they ultimately didn’t tell me how to improve my mixes, and I don’t know why.

ADAM A7X

6. What gear has inspired you to produce the most music?

My Toft ATB-16 mix console.  Being able to mix through a console with sufficient routing options that I can always have my hands on just makes life infinitely easier than any other workflow I’ve tried.

Toft ATB-16 mix console

7. If you had to start over, what would you get first?

Some frame or lunchbox for API 500 gear, and a Daking MicPre 500 to fit in it.  There’s a pair at my shared studio that I just find incredibly versatile, and a good preamp can be a go-to forever.

Daking MicPre 500

8. What’s the most annoying piece of gear you have, that you just can’t live without?

My B&B Systems AM-2B phase scope keeps losing alignment, which is annoying — maybe it needs to go back to the shop.  I can’t live without it because it can show me problems in a mix more quickly than I can hear them.

B&B Systems AM-2B phase scope

9. Most surprising tip or trick or technique that you’ve discovered about a bit of kit?

In mastering, a recent discovery was the utility of very-slow attack times on compressors.  When I do mid-side mastering, for the mid, I often use the slowest attack time on the compressor.  This tends to bring up the quiet parts without affecting the loud ones.  I often use my Buzz Audio SOC-20 for this step.

Buzz Audio SOC-20

Artist or Band name?

The studio is Steveco Worldwide.  I currently make music under my name, Steve Silverstein — my band Christmas Decorations has not been active for over a decade.

Genre? 

I record music in all genres, including many albums in the suburbs of rock music.  My own music is experimental electronic or ambient, or both, maybe neither.

Selfie?

Steve Silverstein

Where are you from?

I grew up in the suburbs of Baltimore, Maryland, a place called Pikesville.

How did you get into music?

It was on the radio in my parents’ cars, and on my older sister’s stereo and boombox.  I took piano lessons as a child.  Eventually, a passion developed and stuck.

What still drives you to make music?

I can’t imagine what else I can do now!

How do you most often start a new track?

Most tracks that I work on are for other artists, so they usually start.  With my own music, recordings sometimes begin with an improvisation on one instrument.

How do you know when a track is finished?

It depends on which step of the process.  For a mix, I usually double-check against references in similar genres, or other approved tracks by the same artist, and then check on a few pairs of speakers.  Mixes and masters are both finished by cleanup at the beginning and end of the track.

Show us your current studio

SteveCo Studio

Best creative advice that you’ve ever heard?

A musician I work for tells the story that he used to think that a more expensive studio always led to a better result, and he’s learned that it’s more important to have a team of people he trusts for each step of his process where he wants professional help.

Promote your latest thing… Go ahead, throw us a link.

I’ve been actively promoting my studio’s new Instagram:  https://www.instagram.com/steveco.worldwide/


JayE – Diamonds From The Basement

[Editor: In case you didn’t know this… JayE is a Diamond record producer. That means over 10 million copies sold. And this was back when actual units got shipped and not streamed. He might not be making music in your preferred genre, but he is a heavyweight. And it is quite wonderful for me to share his answers with you all]

1. Favourite knob/fader/switch on a piece of gear and why?

Memory Moog dual Frequency knob

The frequency knob on the Memory Moog. It’s a duel knob that has a center knob inside for fine tuning. Really unique and useful for a single knob.

2. Do you have an ‘almost’ perfect bit of kit? What would you change?

My MPC3000, I wish it had CV and Gate out, like the current MPCs (MPCX and MPC One) The 3000 is a beast other than that.

3. What setup do you bring on holiday/tour/commute etc.?

OP1, iPad, and A Pocket Operator. 

OP1, iPad, and a Pocket Operator

4. What software do you wish was hardware and vice versa?

That’s a tough question since so many pieces of hardware are now software. So I would have to say, I wish maybe a iZotope RX9 hardware piece of gear would be awesome. I use it a lot to remove elements from vinyl record samples, like removing the vocals to make instrumentals , or just have the drums or the bass stand alone of a sample.. it’s really powerful and would be pretty awesome to have right next to my turntable at all times and move knobs on the fly to remove elements.

iZotope RX9

5. Is there anything you regret selling… or regret buying?

I sold my OSCar and TR909 a few years back. I really wasn’t using them a lot cause they both had internal issues, that I wasn’t at the time knowledgeable of, but I probably could fix them now on my own, with a bit of help from friends and searching on the internet.

6. What gear has inspired you to produce the most music?

I would say my MPC 3000, it just has an awesome feel and its also the one piece of gear I can be blindfolded and still work with.

Akai MPC 3000

7. If you had to start over, what would you get first?

A Juno 60 or 106… I feel like its a perfect synth to learn synthesis and learn to design sounds.. I started off just using presets and a lot of my early boards were too complicated to sound design on the fly… like the Korg Trinity and K2600.

A chorus of Junos

8. What’s the most annoying piece of gear you have, that you just can’t live without?

That’s tough cause if it is annoying, I usually replace it for something non annoying… I guess I would say the ASR10.. I love the sound, but I still have yet to master it.
It has so many pages of options, and every ASR 10 I have had, has been unstable, where the more tweaking you do, it freezes up or crashes, which is annoying… but it is one of the warmest samplers I have ever heard… nothing sounds like an ASR 10 sampler.

Ensoniq ASR10

9. Most surprising tip/trick/technique that you’ve discovered about a bit of kit?

I recently discovered step sampling on my MPC 3000 I always seen it, but never dove into it.. back then I never found a need for it… and thought it wasn’t practical on how I record, but now I use it a lot.


Artist or Band name?

Jay E

Genre?

HipHop/Pop

Selfie?

Where are you from?

St. Louis.

How did you get into music?

I was a house party DJ that loved music and decided I wanted to make the same kind of records I was spinning.

What still drives you to make music?

New equipment and new music from different genres of music… I rarely listen to hiphop… even though that’s what I’m known for.

How do you most often start a new track?

Lately its been sound designing and wherever that takes me. I used to just start with drums or a melody.. but after 20+ years of making music.. I tend to try new techniques and less obvious ways of starting music making.

How do you know when a track is finished?

When I have a good idea on what the verse and hook sound like. After that I just structure and do breakdowns

Show us your current studio

Fisheye in the studio
Panorama of the JayE’s studio (Hint: this photo is clickable to view a big version)

Best creative advice that you’ve ever heard?

Limit yourself to one or two pieces of gear and it forces you to be creative in a new way.

New sounds are available at JayESounds.com

Instagram/Facebook/YouTube – JayEBeats