Nathan – Accelerator Jengold

1. Favourite knob/fader/switch on a piece of gear and why?

In terms of aesthetics and tactility, it has to be the main rotary knob on the ZOIA by Empress Effects. The way it subtly clicks is super satisfying, and the chunky chrome design stands out compared to other pedal knobs. In terms of functionality I’ll go with the D-C-V (Dry-Chorus-Vibrato) knob on the Walrus Audio Julianna.

Dry-Chorus-Vibrato knob on the Walrus Audio Julianna

It controls the stereo spread of the effect and the mix of chorus and vibrato. The Julianna is an ‘always on’ pedal for me – the modulation sounds great and D-C-V knob helps to always find that sweet spot. I typically use the Julianna to make lofi guitar tones using the random LFO setting and a slow vibrato.

2. Do you have an ‘almost’ perfect bit of kit? What would you change?

I’ll have to go with the ZOIA again for this question! It’s one of my favourite pieces of gear and I use it in pretty much all of my music. It’s both dauntingly complex and surprisingly intuitive. It’s mind-blowing how much Empress Effects managed to cram into this small box! I’ve been using it for a couple of years now, but I still feel like I’ve only scratched the surface of what it can do. I use it in all sorts of ways, such as a semi-generative synthesizer, looper, midi controller and of course as a multi-FX unit.

ZOIA by Empress Effects

My only complaint is that because it does so much it’s difficult to know where best to put it in the signal chain. One possible solution would be a set of additional inputs/outputs for an FX loop, and the ability to assign modules either before or after the FX loop. A couple of additional assignable knobs would also make parameter control more immediate.

3. What setup do you bring on holiday/tour/commute etc.?

I’m a fan of the Elektron Model:Samples for making music on the go. It’s super portable and I like the directness of the ‘function per knob’ design. It’s perfect for quickly sketching out ideas whilst travelling.

Elektron Model:Samples

Other devices offer more features, like the OP-Z, but I have a soft spot for the Elektron workflow. I don’t use it in my main setup due to the lack of direct sampling, but it’s a fun device to kill some time with.

4. What software do you wish was hardware and vice versa?

I predominantly use a ‘DAWless’ setup, so I don’t have much experience with software. I only really use my DAW (Studio One 5 to be exact) to record/master and try to do everything else using hardware. Tactility is an integral part of making music for me, I like the physical connection to whatever I’m writing. I don’t have the same drive to write music when I’m working on a laptop. I also find a limited palette of sounds to be quite inspiring, so the inherent limitations of hardware gear can paradoxically be liberating.

Nathan’s pedalboard of tactility

That said, I would love a virtual version of my pedalboard so I could try out different setups without having to tear the whole thing apart!

5. Is there anything you regret selling… or regret buying?

I recently sold my Walrus Audio Slö reverb pedal and replaced it with a Meris Mercury7. Although I really like the expansive stereo sound of the Mercury7, I definitely prefer the modulation on the Slö. It has a unique dreamy quality which is perfect for lo-fi reverbs and woozy textures. I would rebuy it in a heartbeat if they ever made a stereo version with a random LFO mode

Sovtek Big Muff

My biggest gear regret is not looking after my Sovtek Big Muff. Unfortunately it’s been battered from years of gigging and no longer has the original knobs or switch. It’s just too temperamental to use regularly in my setup now.

6. What gear has inspired you to produce the most music?

Roland JU-06A

I’ve been really inspired by the Roland JU-06A synth over the past year, it’s the synth I come back to most often. I love the range of sounds, the simplicity of patch design and its compact size. Roland did a great job replicating that classic Juno sound in a small and affordable package. I also get a lot of inspiration from my humble Boss RC202 loop station. I love working with loops and layers, and the RC202 offers a good balance of features and usability. All of my tracks begin as loops, and I wouldn’t know where to start without my RC202.

7. If you had to start over, what would you get first?

This is a bit of a cop out, but if I had to start over I would probably start with some guitar and piano lessons! I’m completely self-taught, so I sometimes feel a little limited by my technical skills. To answer the question more directly, if I was starting over with electronic music production I would probably begin with an Arturia Microfreak.

Arturia Microfreak

Due to the wide range of features and relatively low price, it’s a great introduction to hardware synthesis. The keybed isn’t for everyone, but the range of synth engines, the intuitive modulation matrix and the analogue filter make it incredibly good value. If it had built-in FX it would be the total package. Although I don’t use mine much anymore, I still consider it to be a modern classic.

8. What’s the most annoying piece of gear you have, that you just can’t live without?

As much as I love my Elektron Digitakt, it can be a real pain to use sometimes! There are a lot of functions which are not immediately apparent, and it takes time to learn how to use it properly.

Elektron Digitakt

I actually prefer the usability of its little brother, the Model:Samples, but the additional features of the Digitakt make it substantially more powerful. It’s basically the brain of my setup, even though I probably don’t use it to its full potential. Elektron have done a great job with software updates over the years and have added a number of clever features, like the secondary LFO.

9. Most surprising tip/trick/technique that you’ve discovered about a bit of kit?

The Expression Ramper by Old Blood Noise Endeavours is a deceptively versatile pedal, which offers a unique approach to expression control. There are so many ways to use this tiny pedal to drastically change how other pedals work.

Expression Ramper by Old Blood Noise Endeavours

My favourite trick is to use the Expression Ramper to control the pitch parameter on the Red Panda Particle v2. Whilst in reverse mode it creates a fantastic reverse pitch-shift effect which cascades with the delay repeats.


Artist or Band name?

Accelerator Jengold.

Genre?

A mix of lofi, synthwave, dreampop and shoegaze.

Selfie?

Nathan

Where are you from?

North Wales, UK.

How did you get into music?

Music has always been an important part of my life; I’m thankful that my parents and brother introduced me to artists like The Cure, Radiohead, Tom Waits, Massive Attack, Godspeed You! Black Emperor and Brian Eno. I took up bass when I was a teenager and played in a few post-rock and post-metal bands whilst in University. I later moved into electronic music production using software like Reason, and then got into hardware gear with an Arturia Microbrute (which I sadly no longer own).

What still drives you to make music?

I’ve always enjoyed being creative and having a musical outlet helps me to cope with stress and anxiety. I like having a way to express how I feel, even if I don’t always understand my own thoughts and feelings – which probably explains why most of my music has a downbeat or melancholy vibe. Producing something tangible from my creativity, like a finished song or EP, is a big driver for me.
I think this is linked to my preference for tactile music production; using software feels too ephemeral to me. I love conceptual music and take inspiration from a wide range of books, films and other media when writing. Short-form jams on Instagram are my primary output, so I’m super inspired by other artists with a similar approach like Andrew Black, Joshua Dowell and Simon Von Walbrook. I’m really proud to have had my music featured on microbiology posts by Chloe Savard and Penny Fenton, and I would love to produce more music for other media.

How do you most often start a new track?

I typically start with sound design, either creating a unique guitar sound using various FX or developing a new synth patch. I’ll then loop a simple melody and experiment with different layers until it feels right. Sometimes I focus on the melody, other times I focus more on the overall vibe, it just depends on the individual track. Percussion usually comes last so I can choose samples and rhythms to fit the music. 

How do you know when a track is finished?

Most of my music is based around looping and building layers of melody, so an important skill is knowing when to stop. When I can remove a layer and the track sounds better, it’s probably finished! If I get stuck on a track I’ll take a break for a few days and then come back to it with a fresh perspective. My least favourite part of making music is mastering, so I’ve developed a couple of mastering templates in my DAW to help speed up the process and remove some layers of indecision. For official releases on Spotify (etc.) I rely on my good friend Chris Walker, who always does a great job fixing up my masters.

Show us your current studio

Synths, samplers and loopers

My setup is in a tiny office/walk-in wardrobe in my house, but it has pretty much everything I need. I’m planning to add an analogue synth at some point (like a Pro-1 or Minilogue) and a Colour Palette electronic kalimba by Lottie Canto.

Studio desk

Best creative advice that you’ve ever heard?

I’m going to echo what Dev Bhat (Shipwreck Detective) said in his interview for this blog: “keep it simple, stupid!” This really resonates with my own approach to writing music. There’s a skill to communicating an emotion, theme or concept in an honest and direct manner without resorting to cliché. I like to embrace simplicity and try to express myself with a limited number of components.
An important part of being creative is trusting your instincts and not focusing too much on what does or doesn’t work in theory – theory should be used to help us translate and communicate our ideas rather than to provide a rigid framework for them.

Promote your latest thing… Go ahead, throw us a link

I regularly post jams on Instagram (@accelerator.jengold), so that’s the best place to keep up to date with what I’m doing. My music is also available on most streaming platforms, just search for Accelerator Jengold. My latest EP, Pyre, came out last year and is full of weirdo synthwave tunes, go check it out! I’m currently working on a new EP and some upcoming collaborations. Thanks!

Instagram: https://www.instagram.com/accelerator.jengold/

Spotify: https://open.spotify.com/artist/0KrYUaPA2BsqVMiDCVmywM?si=ZJdIN-wDS4-J0UdkHjEWsA

Linktree: https://linktr.ee/acceleratorjengold


Joseph Willem Ricci-Anima&Ennui

1. Favourite knob or fader or switch on a piece of gear and why?

Fender Ramparte goes all the way up to 16!

My amp goes up not to 10, not to 11, but all the way up to the hilariously arbitrary number of 16. It’s a Fender Ramparte, and although it looks like it belongs on the stage of a hushed, smoky, late-night show at an upscale 1950’s jazz club, it—well… as Music Radar puts it—”requires anti-social volume levels to avoid intrusive hum”. Honestly, it’s a bit of a gimmicky amp which I’m not particularly proud of, but I do genuinely love that its two volume knobs are its only knobs. No tone, no drive, no reverb. Keep it simple.

2. Do you have an ‘almost’ perfect bit of kit? What would you change?

Walrus Audio Slö reverb pedal

The Walrus Audio Slö reverb pedal is my baby. It’s whole thing is that it pitch-modulates the wet signal. I plug my acoustic guitar into it when playing live, and when subtly mixed in, it creates the subconscious sensation that everything is slightly moving, like a boat in an easy current. It’s a really musical pedal, and I like to adjust the mix while I’m playing to give the guitar an element of changing depth, but holy hell do I wish you could plug an expression pedal into it, because turning the tiny mix knob with my right foot while playing a difficult guitar part and singing requires way more concentration than is actually reasonable.

3. What setup do you bring on holiday or tour or commute etc.?

I’m one for bringing a guitar with me just about everywhere I go.

Guitar up a mountain

4. What software do you wish was hardware and vice versa?

Well, the hardware of this software does already exist, but I don’t own one and sure, I wouldn’t mind if I did. That’d be the hardware version of the Minimoog iOS app.

Mighty Moog

5. Is there anything you regret selling… or regret buying?

In October I had a really remarkable week in which I broke my Martin (like, I mean smashed it), computer, phone, bike (twice) and rain jacket. I panicked and sold my classical guitar, a really nice Takamine TH90. I wish I would have just taken a couple extra days to breathe before letting it go, because the world always has a way of coming through for you when you need it to.

Takamine TH90

6. What gear has inspired you to produce the most music?

Lately, my newest toy, a Korg Minilogue XD has been opening up a whole new world for me. I don’t know how to play anything on the keys except for the intro to “Roses” by Outkast, so it’s been an amazing exercise to sit down and write with no focus on melody, chords or structure, and instead get my head deep into exclusively texture, color, tone, and movement. And it’s been interesting to discover that, after years of writing songs only on guitar, a piece can feel complete without any of the former qualities, as long as it meaningfully explores the latter ones.

Korg Minilogue XD

7. If you had to start over, what would you get first?

One good microphone. I recorded most of my band’s album on one of those cheap Audio Technica mics. There’s a lot that I would do differently if starting over, but at the very least I wish I knew that as soon as that precious frequency spectrum enters that black hole of a microphone, much of it is never coming back.

8. What’s the most annoying piece of gear you have, that you just can’t live without?

Martin 00-15

My Martin 00-15. Although I had already been playing guitar for almost fifteen years before getting it, it was my first ever really nice guitar. It’s warm, responsive, has subtle, nuanced overtones and overall is just a joy to play. But, what I didn’t expect when I got it, is that it shows me how much better I could play. On a shitty guitar, the difference in sound between playing something well and playing something poorly isn’t really that big. But on this one, a perfectly played chord or passage—with just the right fretting pressure and position, just the right picking contact point between fingernail and fingertip, just the right balance in emphasis of the bass, middle and treble lines, just the right transition between chords while the resonance from the last one lingers in the body for a moment… you get the idea—sounds and feels SO good that, while it has taught me to become a more sensitive player, it has also made it abundantly clear how much subtlety there is to the instrument, and how far there is to go.

9. Most surprising tip or trick or technique that you’ve discovered about a bit of kit?

If you have a guitar, buy a gig bag and go for a bike ride. At some point during the ride, fall off your bike directly onto your back so your guitar catches your fall and smashes under your weight. Then find a luthier or repair person to fix it, and voila: your guitar will sound even better.

Korg and Walrus and Song cassette tape

Jk. Def don’t do that. Maybe a more useful tip: I always wanted to play the sounds of nature on my analog instruments. This little set up gets pretty close to that. I take a cassette with the sound of running water, birds chirping, or wind in the trees, and merge the signal together with the signal of my guitar or synth. Then I run the merged signal into my Walrus Slö reverb pedal on auto-swell and with 100% wet mix. Since the auto-swell reverb tail is triggered by change of amplitude, it acts as a gate for the soft, ambient nature sounds. But when you play your instrument, it triggers the auto-swell, letting through the merged signal of the instrument plus the sound of running water.


Artist or Band name?

Anima & Ennui. Maybe future music will be under a different name… maybe not.

Genre?

The released music is folk mixed with various other influences. Future music is yet to be categorized.

Selfie?

Joseph Willem Ricci

Where are you from?

Arlington, Massachusetts, USA

How did you get into music?

I was listening to Arnold Schoenberg in the womb. That’s to say through my parents 🙂

What still drives you to make music?

I feel like it would be almost criminal to not bring into the world the music that is in my head. Just as I don’t belong to myself, my music doesn’t belong to me—it belongs to the world.

How do you most often start a new track?

Songs seem to start when I’m not trying to do anything in particular. Non-doing. Fiddling around. Then when a certain fiddle or theme or accident suddenly catches my attention, suddenly feels like the most beautiful thing I’ve ever heard, that’s when it starts.

How do you know when a track is finished?

When it feels right. That’s it.

Show us your current studio

Joseph Willem Ricci’s Studio

Best creative advice that you’ve ever heard?

Mistakes don’t exist.

Promote your latest thing… Go ahead, throw us a link.

2020 album is online. Anima & Ennui – An & En. For a taste of a different, more recent direction though:

https://soundcloud.com/anima_x_ennui/ywayvdre4xkz/s-nMLQ4Uk5jGl


[Editor: Do you have a favorite tip, trick or way of working with any of the gear from this interview?
Then throw us a comment below…
]


Paul Talos – Signal Soundlabs

1. Favourite knob/fader/switch on a piece of gear and why?

Make Noise Morphagene

Lately, it’s been the Vari-Speed knob on the Morphagene. It’s really incredible how something as simple as changing the speed and pitch of a sound can turn it into something completely unrecognizable. Things get even more interesting when you start reversing things too. You really end up discovering all kinds of sounds within sounds that you never really would have thought were there, especially when slowing samples down. Gotta love the wonderful world of microsound.

2. Do you have an ‘almost’ perfect bit of kit? What would you change?

Moog Subsequent 37

The closest thing for me would be my Moog Subsequent 37. It just puts so much sound design power at your fingertips, you almost don’t need anything else. Between having one of my favorite filters, two different kinds of distortion, and plenty of modulation options, there’s enough in there to make a lifetime’s worth of music. It may not be as infinitely versatile as my eurorack setup, but there’s a certain immediacy about it that allows me to get what I need out of it very quickly. The only thing that could possibly make it even better is if it had voltage control over more of the parameters. I actually really regret not jumping on the CV version while they were still making those, as that would have been as close to perfect as you can get.

3. What setup do you bring on holiday/tour/commute etc.?

Moog Mother-32

I can’t say I do much traveling with my gear, as my setup wasn’t exactly designed with mobility in mind. But I guess if I were to bring anything, it would be my Moog Mother-32. Not only is it one of my more compact instruments, but I find its limitations to be pretty inspiring. It’s a surprisingly deep instrument and can yield some very unexpected results with a bit of clever patching. I often feel like I’m just scratching the surface of what it can do, so I suppose traveling with it would really force me to get everything I can out of it.

4. What software do you wish was hardware and vice versa?

Spectrasonics Omnisphere

I really wish there was some kind of hardware version of Spectrasonics Omnisphere. It’s such a useful instrument when scoring for a film, especially for creating cinematic soundscapes. It’s one of the few VST instruments I find myself going back to time and time again. If they made a hardware version with some CV control over the parameters, I’d buy one in a heartbeat. Of course, with the size of the library being what it is, I’m sure it would be incredibly impractical to actually implement in hardware form, much less in eurorack format.

Walrus Audio Descent

On the flip side, I’d love a plugin version of my Walrus Audio Descent reverb pedal. I use the shimmer mode on that pedal quite a bit to add an almost choir-like quality to synths, and would love to have multiple software instances to use throughout a mix. Sure, there are ways of creating a similar sound using other software (the Descent is digital after all) but the pitch shifting on this pedal has a very particular, kind of unnatural sound to it. Hard to describe, but it definitely has a tone and I haven’t really come across anything else that sounds quite like it.

5. Is there anything you regret selling… or regret buying?

Korg MS-20 mini

I sold my Korg MS-20 mini when I first started diving into eurorack. At the time, I figured it didn’t make sense to have a semi-modular synth that didn’t speak Volt per Octave and was looking to get some cash to finance the beginnings of my modular (I believe I ended up buying a Maths with the money I made). But over time I realized just how much I missed those oscillators and filters. It’s such a unique instrument, and much like the Mother-32, it just has a very inspiring set of limitations. So last year, I actually ended up buying it again and will never repeat the mistake of selling it.

Arturia Minibrute 2S

As far as buyer’s remorse on a piece of gear, I bought an Arturia Minibrute 2S when they first came out and had some regrets on that one. The synth voice itself is phenomenal, and the ability to integrate it with eurorack really enhanced the functionality of my existing modular system. But I never got into a good flow with the sequencer. As someone with a background in music theory, I found it really difficult to visualize musical intervals due to its lack of a traditional keyboard. So I eventually ended up selling it and getting the keyboard version instead. Been loving it ever since.

6. What gear has inspired you to produce the most music?

Signal SoundLabs Eurorack

Lately, my eurorack rig has been the most consistent source of inspiration. I made some upgrades to it recently, and after about three years of buying and selling modules, I finally feel like I have most of the puzzle pieces in place. Modular synthesis definitely has an element of unpredictability, feels like these modules have a will of their own sometimes and I’m just along for the ride.
It really is a happy accident machine. The downside is it can be a bit difficult to tame, especially when working on music that is synced to visuals. But lately I’ve managed to find a workflow that has been very effective for film music. The key was to start recording everything I did on the modular and then spending some time editing to pick out all the best parts. The editing can be time consuming, but I find myself getting faster and faster with patching so it all evens out. Overall, I just find it more inspiring to capture a bunch of audio from the modular and then work by subtraction rather than addition.

7. If you had to start over, what would you get first?

If I had to start again, I’d probably get the most powerful computer I could afford, along with a copy of Cubase, a Universal Audio Apollo Twin, and some kind of semi-modular synth like the Minibrute 2. A basic rig like this would cover pretty much all the essentials, while combining a tactile hardware workflow with plenty of digital flexibility.

8. What’s the most annoying piece of gear you have, that you just can’t live without?

Mutable Instruments Clouds

Hard to say, but I guess I kind of have a love/hate relationship with my Mutable Instruments Clouds module. I rely on it pretty heavily when it comes to making any kind of ambient drone patch, but I find it rather annoying having to remember what all the controls do in its various different modes. Having installed the Parasite firmware really didn’t help with that either. That said, I came across an iOS app called Modes that acts as a nice cheat sheet for some multi-function modules, so I’m definitely not pulling my hair out as much as before. As much as I have a few gripes with Clouds, it really brings a lot to the table and has become pretty much irreplaceable in my rack.

9. Most surprising tip/trick/technique that you’ve discovered about a bit of kit?

Chase Bliss MOOD

I’ve recently been getting more and more into processing audio from Cubase using effects pedals. Plug-ins can be great, particularly for utility functions like EQ, but nowadays there are so many unique pedals out there, it feels like a shame not to use them to process in-the-box sounds as well. I’ve been doing this a lot with my Chase Bliss MOOD pedal in particular, which lets me grab a short slice of audio from the DAW and transform it in all kinds of quirky and interesting ways. Lately, whenever I get stuck on a track, I’ll start feeding random audio into MOOD (unused takes from the modular work particularly well) just to see what happens. It’s a great way to get myself out of a creative rut.


Artist or Band name?

Paul Talos

Genre?

Cinematic Electronica. I’ve never been sure how to categorize my music exactly, so eventually I just made something up. I think it sums things up pretty nicely.

Selfie?

Paul Talos

Where are you from?

Born in Germany, grew up in Boston, MA. Currently living in Philadelphia, PA.

How did you get into music?

I started playing electric guitar around the age of ten and started experimenting with home recording on a laptop when I was a teenager. After high school, I spent some time at Berklee College of Music studying guitar and discovered a love of synthesis and all things electronic music shortly after that.

What still drives you to make music?

Music’s become my job over the last few years, so a paycheck is definitely one thing that drives me. But more importantly, I constantly find myself inspired by just listening to other people’s music and trying to deconstruct what I’m hearing. I’ve come across some very interesting synthesis and production techniques just by trying (and usually failing) to emulate something I heard somewhere else.

How do you most often start a new track?

As a film composer, the answer to that question really varies from project to project. Production timelines and deadlines can be vastly different from one film to the next, so sometimes it might be starting a new track every day, other times I’ll write two or three a week. I do try to spend some time every day just to make some kind of noise though, usually on the modular. I find that synthesis is a skill that really needs to be maintained, otherwise it just gets harder the longer you are away from it. So regardless of what I’m working on, I try to squeeze in some synth time at least once a day, so I don’t get too rusty.

How do you know when a track is finished?

It really never is, but once the deadline hits it’s usually good enough. Honestly, if I didn’t have deadlines of some sort, I’m not sure I would ever finish anything. 

Show us your current studio

Signal SoundLabs studio

Best creative advice that you’ve ever heard?

This one kind of relates to one of the other questions about finishing tracks. I took this music production class in college, and the professor said something one day that really stuck with me. I’m paraphrasing, but it was something along the lines of this: A mix is never done, you just stop working on it eventually. To hear that from a professional in the industry was incredibly reassuring at the time. I think it’s something that applies not only to a mix, but to music making in general. Nothing is ever truly finished and that’s okay.

Promote your latest thing… Go ahead, throw us a link.

Back in July, I released my score for a short thriller film called ‘Just Like You.’ The score is available on all streaming platforms. Links below.

Just Like You (Spotify)

https://music.apple.com/us/album/just-like-you-original-score-ep/1521324795

https://paultalos.bandcamp.com/releases


[Editor: Do you have a favorite tip, trick or way of working with any of the gear from this interview?
Then throw us a comment below…
]