1. Favourite knob or fader or switch on a piece of gear and why?
Morphagene’s varispeed knob! I’ve got a lot of great feeling knobs, but this one is the only one that has this nice colour window. I used this module a lot lately and I never got bored of that intimate light show. It’s immediate, fun and incredibly inspiring.
2. Do you have an ‘almost’ perfect bit of kit? What would you change?
My first modular setup is as close to perfection as I got with a piece of gear. It went through a few phases, but it’s stayed as it was when it got in that wooden case for years. It’s very limited compared to my Palette setup, but it’s what makes it perfect. It’s an incredibly fun mono synth with a ton of tricks up its sleeves.
There’s a few things that I’d change still. I had this case built and I asked for a deep bottom section. I didn’t know what I’d put in it at the time, so it’s deep enough to accomodate any module. I think the deepest one in there is the Disting. It’s way deeper than it needs to be which makes it bigger and heavier than I’d like. I also temporarily swapped my uVCAII for a ModDemix. It was a mistake and the uVCAII will come back in its right place. Don’t mess with a perfectly good setup.
3. What setup do you bring on holiday or tour or commute etc.?
I haven’t toured yet, but I settled on a live setup this past summer. I went and recorded a live version of douzaine with that setup and I found it to be very fun. The Digitone takes care of the sequencing and of the key sounds, while the modular adds another analog voice on top. My guitar is being fed in the Morphagene for some live looping/mangling.
I also don’t take gear on holidays. Either that vacation time is used to record stuff or it’s used for some time off. I either bring everything or I bring nothing. No half-measures!
4. What software do you wish was hardware and vice versa?
I don’t own an iOS device, but I’ve been very interested in both Gauss Field Looper and Flip. I’ve been looking for a cheap and immediate way to record ideas. A sketch book of some sorts. I’d love for some kind of device which would run these apps, but with a better physical I/O integration. I’d get rid of the touch screen as well, I don’t like those on music things. The OP1 fits in that sketchbook territory, but I did get to try it and I found out that it’s not exactly my cup of tea.
I’d also like to have a clean and efficient way to record tape loops. I sometimes want to use them on a track, but I switch plans as it takes a bit of time to get right. I’d use a digital version if it did the exact same thing. Messy and dusty places don’t go well with magnetic tape.
5. Is there anything you regret selling… or regret buying?
Yes! Many actually. I cheaped out on my first and only mic stand. I bought a very small kick drum one as I only wanted to record my amp. At its lowest, it sits too high to record an amp that’s on the ground. I have to prop the amp on something to make it work. It’s also too small to record acoustic guitars, I need to get a chair for it and it puts me in a weird position. I borrowed one from my brother (thanks Nicolas!) and I haven’t used this one in a while. I sometimes use my Zoom H4n to record amps as it’s easier than using this mic stand.
6. What gear has inspired you to produce the most music?
Definitely the Korg Monologue. It’s heavily featured on two releases of mine and it’s been used on many demos as well. I’m still doing the Monologue + looper jams, the last one being my 37th one. I love it very much and I hope it’ll stay with me for ever.
7. If you had to start over, what would you get first?
I’d get a decent looper pedal. I used a garbage one for so long and it ruined many early recordings I did. They’re great to experiment with if you’re on a budget but I tried to save a few jams and it’s just too messy. I had the chance to use many great loopers from Electro-Harmonix (22500, 45000, 95000) over the years and I realize now that one of those would have made everything so much smoother.
8. What’s the most annoying piece of gear you have, that you just can’t live without?
Tascam Porta02 MKII. The power cord I have is a foot long, the headphone knob is scratchy and it hurts my ears when it moves, it uses RCA cables for the output, etc. There’s so many things I don’t like about it, but it’s still the only running tape machine I have. Tape loops became pretty much necessary for my workflow and I can’t see this one going away soon.
9. Most surprising tip or trick or technique that you’ve discovered about a bit of kit?
I recently shared the secret fuzz I found hidden in my Optomix. Running the audio signal through the strike input (or through the CTRL input for a different flavour) crunches the signal in a weird and pleasing way. Messing with the knobs alters the tone as well. It has a nice bit-crush/gated fuzz type of sound. It’s surprising for a module that’s known for its smooth and organic character.
Artist or Band name?
Couleurves
Genre?
Ambient/New age
Selfie?
Where are you from?
Curently living in Montréal, Québec! I’m originally from the surrounding countryside.
How did you get into music?
I played guitar when I was around 14 years old, but I quit as my brother got way better than I did and I felt discouraged. I didn’t practice so that didn’t help.
Records like Plantasia and Oxygene piqued my interest in late high school. I got hooked on that whole thing when I bought a Volca Keys in college. I got into the music that people like Jogging House and R Beny did back then and jumped straight from the Volca to my first modular setup.
What still drives you to make music?
Finding new sounds and trying new things. I dug deep in Sounds of the Dawn‘s YouTube channel over the last year and now I’m really excited to try a new direction. The mixer is the newest addition to the setup and it makes everything fun and easier to handle.
Right now, I’m excited to work with more acoustic instruments. I’m trying to distance myself from sequences to keep it organic and free-flowing.
How do you most often start a new track?
It starts with a riff or with a single loop. It usually flows pretty easily after the first part is layed down. If the rest doesn’t follow, it’s just not meant to be.
How do you know when a track is finished?
I don’t know! I stop working on a track when I can’t add anything else to it or if it feels done. I almost never rework half-finished things. It’s very spontaneous!
Show us your current studio
Best creative advice that you’ve ever heard?
I’ve been told to just show up. You can’t do something good if you don’t do anything. Just being there, without any idea of what to do, is a great start.
“I have no idea where this will lead us, but I have a definite feeling it will be a place both wonderful and strange.”
― Dale Cooper
Promote your latest thing… Go ahead, throw us a link.
I self-released fils and douzaine over the last few months. They’re available on Bandcamp, on my YouTube channel as well as on a few streaming sites. I also recorded a live session featuring tracks from douzaine which can be watched on my YouTube channel!
I’m currently working on a new album which, I hope, should be out next year. https://couleurves.bandcamp.com/
I’ll be posting a few behind-the-scenes on Instagram until then! https://www.instagram.com/couleurves
[Editor: Do you have a favorite tip, trick or way of working with any of the gear from this interview?
Then throw us a comment below…]
